Kyocera KM-C1530 - Manual (Page 116)

6 Advanced Operations
6-4 KM-C1530
To make settings for single- or double-sided documents and copies
1 Position the document(s) to be copied. (Refer to page 4-1 for more
details.)
2 Select the desired color mode. (Refer to page 2-20 for more details.)
3 Touch [Orig. Ö Copy].
The Orig.
Ö
Copy screen appears.
4 Select the type of document that is
to be copied and the desired type of
copy.
❍ If the recommended memory
(128MB × 2) is not installed, the
screen shown at the right
appears. Select the type of
document that is to be copied.
? When is [Compress Mode]
touched?
➜ If [Compress Mode] is touched,
[Color] (image quality priority) is
set as the default. If the memory
is not installed, touch [Compress] to prevent errors. (Refer to
page 9-45.) Since copy quality will decrease when Compress
Mode is changed, the setting should normally not be changed.
5 Specify any other necessary settings.
6 Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.