Kyocera KM-C1530 - Manual (Page 193)

Administrator Mode Operations 8
KM-C1530 8-23
To set the “Color Shift Correction” parameters
If a difference can be seen between the original document and the copy,
fine adjustments in the color shift can be made.
1 In the Expert User’s Mode screen,
touch [Color Shift Correction (Bk)] for
the color that you wish to adjust.
The corresponding Color Shift Cor-
rection screen appears.
2 Load paper (11 × 17L) into any paper
drawer, and then press the [Start] key
to print out the test pattern.
3 Fold the printed test pattern perpendicularly to the paper feed
direction, check that there is no shift in the up-and-down direction of
the black reference line, and then touch [Enter].
If there is a shift, touch
and to specify the desired adjustment
for “
θ
”, and then repeat steps 2 and 3 until there no longer is a shift.