Kyocera KM-C1530 - Manual (Page 92)

5 Basic Operations
5-4 KM-C1530
5.2 Selecting the Paper Source
Before making a copy, the tray or drawer containing the paper that will be
used must be selected.
Either the paper source is selected automatically when the size of the
document is detected, or the desired paper source can be selected
manually.
● Auto Paper:
If “Auto Paper” is selected, the tray or drawer containing the most
suitable size of paper is selected based on the size of the document
and the specified Zoom setting.
● Manual paper selection:
The tray or drawer containing the paper that you wish to use can be
selected.
To select the paper source before copying
1 Position the document(s) to be copied. (Refer to page 4-1 for more
details.)
2 Select the desired color mode. (Refer to page 2-20 for more details.)
3 Make sure that the Basic screen is
displayed, and then touch [Paper].
A screen that allows you to select
the paper source appears.
4 Select the tray or drawer containing the paper that you wish to use.
5 Specify any other necessary settings.
❍ Zoom (Refer to page 5-14 for more details.)
❍ Original Image Type (Refer to page page 5-18 for more details.)
❍ Density (Refer to page 5-20 for more details.)
6 Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.