Kyocera KM-C1530 - Manual (Page 110)

5 Basic Operations
5-22 KM-C1530
5.8 Interrupting a Copy Job
A long continuous copy operation or print job from the computer can be
quickly paused in order to copy a different document.
✎
Note
Some functions cannot be interrupted. In addition, some settings may
not be available while a copy job is interrupted. For more details, refer
to the “Function Combination Table” on page 11-10.
To interrupt a copy job
1 Press the [Interrupt] key.
The indicator on the [Interrupt] key
lights up and the copy operation is
paused.
2 Remove the document for the
interrupted copy job, and then load
the other document that you wish to
copy.
3 Specify any necessary settings.
? Do you know what settings are selected when the [Interrupt] key is
pressed?
➜ When the [Interrupt] key is pressed, all functions and settings are
reset to their defaults.
4 Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key to copy the other document.