Kyocera KM-C1530 - Manual (Page 14)

1 IMPORTANT! PLEASE READ FIRST
1-4 KM-C1530
INSTALLATION PRECAUTIONS
Environment
CAUTION
• Avoid placing the copier on or in locations which are unstable or not
level. Such locations may cause the copier to fall down or fail over.
This type of situation presents a danger of personal injury or damage
to the copier........................................................................................
• Avoid locations with humidity or dust and dirt. if dust or dirt become
attached to the power plug, clean the plug to avoid the danger of fire
or electrical shock...............................................................................
• Avoid locations near radiators, heaters, or other heat sources. or
locations near flammable items, to avoid the danger of fire. ..............
• To keep the copier cool and facilitate changing of parts and
maintenance, allow access space as shown below.
Leave adequate space, especially around the left cover, to allow air
to be properly ventilated out of the copier. .........................................
67-1/4 (1,707)
47
(1
,19
2
)
11-1/
4(
285
)
58-
1/4
(1
,47
7
)
48 (1,222)
10-3/4 8-1/4
20 (510) 31 (787)
4
55 (1,397)
Unit: inch (mm)
(275) (210)
(100)
• Always use the caster stoppers to stabilize the copier once it is in
place to keep it from moving and/or falling over and causing injury, in
case of installing the large capacity cabinet and the scanner rack.....