Command reference, Command reference -1, Chapter 2 – Lantronix MSS User Manual

Page 10

Advertising

2-1

2: Command Reference

This chapter describes all commands that can be used with the MSS. The commands are listed in
alphabetical order, excluding the Ports and Server parameters, which apply only to the MSS4. For example,

Change Server Bootgateway

is considered the same command as

Change Bootgateway

and is

alphabetized according to the latter.

Commands that configure the MSS serial ports will not affect a dedicated console port unless explicitly
stated in the individual command description.,

Some commands can be used with environment strings, which are discussed in detail in

Appendix B

The following items are provided in the description of each command.

◆

The command’s full syntax, shown in diagram form. See

Command Syntax

on page 1-1 for more

information on the command syntax.

◆

Any restrictions on the command, such as whether you must be the privileged user to use it

◆

Potential errors that may be encountered when using the command