Lantronix MSS - Manual (Page 68)

Command Reference Initialize
2-59
servicename
Enter the name of the desired LAT service.
Rlogin
Adds an Rlogin entry to the host table.
hostname
Enter the IP address of the target host. For UDP only, resolvable hostnames
and broadcast/multicast IP addresses can be used.
SPX
Adds an SPX entry to the host table.
SAPname
Enter the SPX host’s SAP name.
TCP
Adds a TCP entry to the host table. By default, TCP opens a regular Telnet
connection that includes Telnet IAC option negotiation.
UDP
Adds a UDP entry to the host table.
envString
Add the desired environment key(s). See Appendix B for a complete list of
strings. Options must be separated by colons.
Delete
Removes one or all entries from the hostlist.
number
Specify which entry to remove. To view configured host entries, enter the
Show Hostlist command.
See Also Change Dedicated, page 2-19; Crypt Password, page 2-52; Show Hostlist,
page 2-64
2.77 Initialize
Reboots the MSS.
Restrictions Requires privileged user status.
Errors When Reload or Factory initialization takes place, all user-entered commands
are lost; the MSS must be reconfigured.
INITIALIZE
DELAY num
FACTORY
NOBOOT
RELOAD  
 
 
 
 
 
 