Lantronix MSS - Manual (Page 57)

Command Reference Change TCPKeepalive
2-48
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
mask
Specify a mask in numeric IP format, for example, 255.255.255.0.
See Also Change IPAddress, page 2-27; Change Gateway, page 2-24.
2.62 Change TCPKeepalive
Controls the transmission of TCP/IP keepalive packets.
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
Defaults Enabled
2.63 Change Telnetdest
Controls what happens when users Telnet into the MSS using the default Telnet socket (23). By default, a
Telnet session will get a Local> prompt from the MSS. By specifying the Serial option, a Telnet session will
connect directly to the MSS’s serial port (port 1 on the MSS4).
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
Console
Users are connected in Local> mode.
Serial
Users are connected to the serial port as if they Telnetted to port 2001.
Defaults Console
CHANGE SERVER TCPKEEPALIVE
DISABLED
ENABLED  
 
 
CHANGE SERVER TELNETDEST
CONSOLE
SERIAL  
 
 