Lantronix MSS - Manual (Page 53)

Command Reference Change Silentboot
2-44
Restrictions Requires privileged user status.
Does not apply to the MSS485.
Parameters Port
MSS4 only. Specifies a particular port or group of ports.
Note: In the absence of the PortList parameter, the configuration will affect the MSS4’s
current port only.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
Defaults Disabled
2.55 Change Silentboot
Causes the unit to attempt to boot without sending any status messages to the console port (unless there are
errors).
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
Defaults Disabled
See Also Show Server, page 2-65.
2.56 Change SNMPSetComm
Creates an SNMP community name for the MSS and gives that community read/write access. By default,
the MSS has a single community (“public”) with read-only access.
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
communityname
Enter an alphanumeric string of up to 15 bytes.
CHANGE SERVER SILENTBOOT
DISABLED
ENABLED
 
 
 
CHANGE SERVER SNMPSETCOMM communityname