Lantronix MSS - Manual (Page 77)

Command Reference SPX
2-68
Examples Local> SOURCE “labsun:start.com”
See Also Change Startup File, page 2-46
2.100 SPX
Attempts a connection to an SPX-enabled device on the network. SPX devices announce their availability
to the network with SAP names; the target device must be advertising itself via SAP announcements for the
MSS to make a connection.
Errors Does not apply to the MSSLite, MSS-VIA and MSS4.
Parameters SAPname
Enter the target device’s SAP name, for example, MSS_xxxxxx.
2.101 Telnet
Initiates a Telnet connection to a remote host. An environment string can also be specified as described
below. If you have previously configured a preferred host, you can enter the command without a parameter
to automatically connect to the preferred host.
Errors There can be no space between the hostname and the colon (:), or between the
colon and the environment string.
Parameters IPaddress
Enter a text host name or an IP address. This parameter is only optional if a
preferred service has been defined.
envString
Add the desired environment key(s). See Appendix B for a complete list of
strings. Options must be separated by colons.
Examples Local> Telnet 192.0.1.201:T
(Forms a raw TCP connection to the specified host)
Local> Telnet phred:7000
(Connects to the remote console port on host phred)
See Also Change Dedicated, page 2-19; Status Displays, page 5-6.
SPX SAPname
TELNET IPaddress
: envstring