Lantronix MSS - Manual (Page 30)

Command Reference Change DHCP
2-21
2.14 Change DHCP
Enables or disables querying for a DHCP host at system boot time.
Restrictions Requires privileged user status.
Errors Configuring an IP address will automatically disable DHCP.
Enabling DHCP will remove the IP address saved in non-volatile memory
(NVR).
Parameters Server
MSS4 only.
Defaults Enabled
See Also The IP Address Configuration section of your Installation Guide.
2.15 Change Domain
Specifies the default domain name to be used when attempting to resolve text TCP/IP host names.
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
DomainName
Enter a domain name of no more than 64 characters.
None
Disables the previously configured domain name.
See Also Change Nameserver, page 2-33
CHANGE SERVER DHCP
DISABLED
ENABLED  
 
 
CHANGE SERVER DOMAIN
DomainName
NONE
 
 
 