Lantronix MSS - Manual (Page 29)

Command Reference Change Dedicated
2-20
Hostlist
Dedicates the port to a list of hosts. For more information, see the Hostlist
command on page 2-58.
LAT
Dedicates the port to a LAT service.
servicename
Enter the name of the desired LAT service.
None
Disables all previously-configured dedicated hosts.
Rlogin
Dedicates the port to Rlogin connections.
Seqlist
Enables a sequential hostlist. When a sequential hostlist is enabled, the MSS
will attempt to connect to the first host in the hostlist. If that connection fails,
it will attempt to connect to the second host listed, and if that fails, the third
host, continuing through all hostlist entries. As soon as a valid connection is
established, normal data flow will occur between the MSS and the connected
host.
SPX
Dedicates the port to an SPX host.
SAPname
Enter the target SPX host’s SAP name.
TCP
Specifies a TCP/IP host. By default, TCP opens a regular Telnet connection
that includes Telnet IAC option negotiation. The :T environment string allows
you to open a raw TCP socket with no Telnet option negotiation, if desired.
The :R environment string allows you to make an Rlogin connection. A socket
number can also be added to connect to a socket other than the default.
hostname
Enter a text host name or a numeric IP address.
envString
Add the desired environment key(s). See Appendix B for a complete list of
strings. Options must be separated by colons.
Defaults Disabled
Examples Local> CHANGE DEDICATED TCP chimaera:2001T
(forms a raw Telnet connection to socket 2001 on host chimaera)
Local> CHANGE DEDICATED TCP :4096US120
(forms a passive UDP connection with any host where once a packet is received, the
MSS will communicate with only that host until 120 seconds of inactivity have
occurred and will then return to the initial state of accepting a UDP packet from any
host.)
See Also Change Preferred, page 2-39; Crypt Password, page 2-52; Hostlist, page 2-58