Lantronix MSS - Manual (Page 49)

Command Reference Change Privpass
2-40
servicename
Enter the name of the desired LAT service.
envString
Add the desired environment key(s). See Appendix B for a complete list of
strings. Options must be separated by colons.
None
Clears preferred service configurations.
See Also Change Dedicated, page 2-19.
2.47 Change Privpass
Sets the password to become the privileged user. The password should consist of no more than 6 alphabetic
letters.
If you do not enter the password at the command line, you will immediately be prompted to enter the new
password. This password is not displayed when typed.
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
passwd
Enter a password of up to 6 alphabetic characters. When entered as part of the
command, the password should be enclosed in quotation marks.
Defaults system
Examples CHANGE PRIVPASS “walrus”
See Also Set Privileged, page 2-63.
2.48 Change RARP
Controls whether the MSS will query for a RARP host at system boot time.
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
CHANGE SERVER PRIVPASS passwd
CHANGE SERVER RARP
DISABLED
ENABLED  
 
 