Lantronix MSS - Manual (Page 70)

Command Reference Netstat
2-61
Note: In the absence of the PortList parameter, the configuration will affect the MSS4’s
current port only.
PortList
MSS4 and MSS-Via only. Specify a port number as an integer between 1 and
3 (Via) or 1 and 6 (MSS4). You can not log out multiple ports at once.
number
Enter a port number.
2.80 Netstat
Displays currently-active NetWare and TCP/IP network connections and the depth of UDP packet queues.
This information is primarily intended for debugging network problems.
2.81 Ping
Sends an IP echo packet request to another network host, and provides an easy way to test IP network
connections. In general, any host that supports IP will respond if it is able, regardless of login restrictions,
job load, or operating system. If the host does not reply, there may be a network IP configuration problem.
Parameters hostname
Enter either a resolvable text host name or a numeric IP address.
length
Length of the ping packet. The default length is 50 bytes.
2.82 Resume
Leaves local mode and resumes the current (most recently active) session or the specified session.
Errors An error is returned if there are no active sessions.
Parameters session
Specify the number of the session you wish to resume.
NETSTAT
PING hostname
length
RESUME session