Adding a server, Prerequisites, Adding a server prerequisites – Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 103
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Adding a server
Prerequisites
The System Management Console has been successfully installed and
started.
Adding a server
Use this procedure to add each of your servers.
Note: You should view the content of this chapter as reference
information. When you perform the procedures in the next three
chapters (in this document) you will be asked to return to this chapter.
Procedure 27 Adding a server
At the System Management Console,
1
Select Sites->MgmtSite->Servers.
2
Right click on the Servers folder.
3
Select Add->General.
4
Use the following system server fields to complete the General
server window that appears.
Note: The shaded rows indicate values that must be
addressed by the installer.
System
server field
Customer defines
Example
Server Name
The name that will appear from the
management console.
<servername>
Host Name
A name unique within your domain.
micromgmt
Location
Optional field. Describes the physical
location of the server.
default
Latitude
Optional field. Describes the latitudinal
coordinates of the location of this server.
default