Verification procedures, Verifying server1 (dbsvr/mgmtsvr/acctmgr) – Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 163
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Verification procedures
Verifying Server1 (DBSvr/MgmtSvr/AcctMgr)
The following commands are executed on the
database/management/accounting Sun Fire V210 server using PuTTY
SSH into the machine logical IP address.
Example: Open a PuTTY SSH session to 120.120.13.22
Procedure 43 Verifying the database server
At the management pc,
1
Log into the server as nortel/<new nortel user password>
2
After the MCS Base Platform System Software installation,
execute the following command to verify IP addressing.
@mcsmicromgmt]/export/home/nortel:=> ifconfig -a
lo0:
flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4
> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
bge0:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DE
PRECATED,IPv4,NOFAILOVER> mtu 1500 index 2 inet
120.120.13.20 netmask ffffff00 broadcast 120.120.13.255
groupname imspub
bge0:1:
flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv
4> mtu 1500 index 2 inet 120.120.13.22 netmask ffffff00
broadcast 120.120.13.255
bge1:
flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,D
EPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu
1500 index 3 inet 120.120.13.21 netmask ffffff00 broadcast
120.120.13.255 groupname imspub
3
Look for the entry that starts with ‘bge0.’ The parameters that
follow show the IP address, subnet mask, and whether the