Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 142)

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
142 Copyright © Nortel Networks Limited 2006
Procedure 40 Configuring the Oracle Monitor tabs
At the System Management Console,
1 Use the values from the table that follows to complete the Oracle
Server tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
2 Use the values from the table that follows to complete the IMS
Main Database tab parameters.
ATTENTION
Do not click Apply until you have finished configuring the
component.
Table 36 Oracle Server tab
Parameter Recommended value Notes Example
SNMP request port 9161 default
SNMP agent IP address <either the word
"localhost" or the
machine logical IP
address of the database
server that this Oracle
Monitor is running on> 120.120.13.22
Oracle Server name imsdb1 default
Active checked default
Monitor functions:
Handler name GeneralInfo default
Monitor functions:
Polling interval (min) 1 default
Active checked default
Monitor functions:
Handler name OperationalStatus default
Monitor functions:
Polling interval (min) 1 default
Active checked default