Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 116
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
116
Copyright © Nortel Networks Limited 2006
The shaded rows indicate values that must be addressed by the
installer.
14
Use the values from the following table to enter into the Overload
Controls tab parameters.
Table 14 Server Properties tab
Parameter
Recommended value
Notes
Example
Service
Parameter:
Label
Public_Service_Address
default
Value:
<machine logical IP
address of the application
server>
This value is for the
Public_Service_Address
120.120.13.25
Service
Parameter:
Label
Private_Service_Address
not applicable
default
Value:
<leave blank>
default
Service
Parameter:
Label
CallPark.TokenRange
Range is 1-80
characters
default
Value:
This is the value to enter
if you have the ability to
park a call. For more
information, see the
MCS SIP Application
Module Basics
(NN10259-111)
document.
default
Table 15 Overload Controls tab
Parameter
Recommended
value
Notes
Example
Mem Polling Interval (sec)
10
default
Minor Alarm Threshold (%)
80
default
Major Alarm Threshold (%)
85
default
Critical Alarm Threshold (%)
90
default