Prerequisites, Installing the system management console – Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 97
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Installing and launching the System
Management Console
Prerequisites
Make sure that
•
The dbdeploy.pl script has been successfully executed.
•
The mgmtdeploy.pl script has been successfully executed.
•
The Sysmgr is started.
•
The license key is registered.
Installing the System Management Console
Procedure 25 Installing the System Management Console
At the management pc,
1
Put the MCS Base Platform System Software CD (MCS
Management Console PC software) into the PC’s CD-ROM.
2
Navigate to the CD-ROM drive and double click on the
executable mcpmc_setup.exe.
3
To install the System Management Console, click Next.
4
To select default program folder, click Next.
5
Enter the <SysMgr service logical IP address>.
Example: 120.120.13.22
6
Click Next.
7
Enter the System Management server port. Keep the default
11111
.
8
Click Next.
9
Keep default destination folder.
10
Click Next.
11
Review settings before copying files.