Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 58)

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
58 Copyright © Nortel Networks Limited 2006
Provide between two and six ping targets or each IPMP group
for proper IPMP failover reliability. Enter the address "0.0.0.0" to
indicate list is complete, if entering less than six targets.
Enter ping target #1: 120.120.13.25
Enter ping target #2: 120.120.13.1
Enter ping target #3: 0.0.0.0
Note: Do NOT use this server's own IP address as a ping
target.
Press Enter after each IP address.
14 The configuration information will come up as shown in the
following figure:
Figure 16 Database/Management/Accounting server IPMP
configuration summary
Is this IPMP group configuration acceptable?
(Y/N)
Select Y and press Enter.
15 The default route IP address should appear. If correct, press
Enter. Otherwise, type it in, then press Enter. Example:
120.120.13.1
Note: If your configuration does not include a router, then
enter the machine logical IP address of your server.
16 You are now configuring Management Server or
Accounting Server Service Failover. Please have
the Management Server System Manager and
Accounting Server Accounting Manager Service
Logical IP addresses and the Machine Logical IP
addresses ready.
Press Enter to continue.