Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 50
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
50
Copyright © Nortel Networks Limited 2006
Netmask/Netmask
9
Enter the subnet mask, for example: 255.255.255.0.
Press Esc+2 to continue.
IPv6/Enables IPv6
10
Accept the default No.
Press Esc+2 to continue.
There is a slight delay between screens. Please wait.
Confirm information
11
Ensure all fields are filled correctly. Press Esc+2 to continue.
Press Esc+4 if you need to change anything.
Configure Security Policy
12
Confirm the Kerberos information by accepting the default No.
Press Esc+2 to continue.
Confirm information
13
Ensure all fields are filled correctly. Press Esc+2 to continue.
Name Service/Name Service
14
Confirm the name service information by using the down arrow
key to navigate to None. Press the Return key. Press Esc+2 to
continue.
ATTENTION
Do not accept the default unless you are sure it is correct for your
subnet.
ATTENTION
IPv6 is not supported.