Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 123)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
123 Copyright © Nortel Networks Limited 2006
2 Use the values from the table that follows to complete the
Database Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
3 Use the values from the table that follows to complete the
UNIStim Base tab parameters.
Phase 1 Firmware ID B60 default
Phase 2 Firmware ID D61 default
Use UFTP checked Box is checked. default
UFTP Server Port 50020 default
Keep Alive Timer 40 default
KA Phone Timer 90 default
Switch Server Delay 5000 default
Min ReReg Delay 60000 default
Max # Reg Attempts 25 default
Server Recovery
Time Min 1 default
Server Recovery
Time Max 5 default
Table 17 IP Client Manager tab (Sheet 2 of 2)
Parameter Recommended Value Notes Example
Table 18 Database Base tab
Parameter Recommended value Notes Example
Primary Host <machine logical IP address of
the primary database server> 120.120.13.22
Connections 5 default
Secondary Host <blank> Leave blank default