Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 48)

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
48 Copyright © Nortel Networks Limited 2006
2
3 At the >ok prompt, boot the system: boot cdrom -
install [Enter]
For instructions on how to get to the >ok prompt, see Powering
on the servers on page 45 .
Note 3: You must wait several minutes before information
begins to appear.
Select a Language
4 To select zero [0] for English,
0 [Enter]
Select a locale
5 To select zero [0] for English,
0 [Enter]
What type of terminal are you using?
6 Select three [3] for DEC VT100,
3 [Enter]
Note: The following message is displayed: The system is
coming up. Please wait.
Solaris Installation Program Page
1 Press Esc, then press the number 2 [Esc+2] to continue.
Note: If you are using a direct console connection to the SUN
terminal, use the F2 key.
2 Press Esc+2 to continue.
ATTENTION
Make sure you put spaces before and after the hyphen: boot
[space] cdrom [space] - [space] install.
ATTENTION
Ignore any time zone and syntax errors you receive. You will set
the time zone and additional information in the next procedure.