Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 119)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
119 Copyright © Nortel Networks Limited 2006
16 Click Apply.
The component will deploy. Wait until you see the dialog box
indicating successful installation. The component will appear in
the file tree.
Parameters: Service
Parameter:
Transport Enabled checked Check the first two
Transport Enabled
boxes (for UDP and
TCP) that display.
Uncheck all
subsequent
instances of
Transport Enabled.
Protocol SIP default
Transport TCP default
Address Public_Service_Address default
Port 5060 default
Params name=sipLscConduit:inte
rface=bge0 Change default qfe0
to bge0 bge0
Table 16 Transport Management tab (Sheet 3 of 3)
Parameter Recommended value Notes Example