Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 77)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Deploying and starting the Sysmgr
Prerequisites
The dbdeploy.pl script is successfully deployed on the database.
Deploy the Sysmgr for a non-redundant configuration. The operator
logs into the machine logical IP address of the management server. At
the UNIX prompt, the operator the uses the script mgmtdeploy.pl to
deploy and start the Sysmgr. This process is described in the following
section.
Deploying and starting the Sysmgr
Procedure 22 Deploying and starting the Sysmgr
At the management pc,
1 Log into the management / accounting server:
User name: nortel
Password:
<Enter your new password.>
2 At the prompt, type mgmtdeploy.pl
ATTENTION
Refer to the customer-specific information for hostname, IP
addresses, subnet masks, and so on.