Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 52)

NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
52 Copyright © Nortel Networks Limited 2006
Wait until you receive the login prompt.
21 You will be prompted to type in the root password twice. The
password will not appear on the screen when you type. If you do
not want a root password, press Enter twice. Press Enter to
continue.
Note: The CD will eject from the CD-ROM. The system then
requests that you insert CD2.
Installing CD2
Approximate time estimate = 15 minutes
Procedure 13 Installing CD2
At the management pc,
1 Place CD2 in the CD-ROM drive and press Enter. You will see
a number of messages requiring no specific answer. Press
Enter following each one.
2 You will then see the following message: What type of
installation are you performing? 1=Typical;
2=Custom
Type 1 and press Enter.
3 You will then see the following message: Ready to Install:
Install Now, Start Over, Exit Installation
Type 1 for Install Now and press Enter.
4 Press Enter several more times to complete the License
Agreement. Enter Y to accept the license.
Note: You will now see a progress bar showing percent of
installation completed.
5 You will then be asked to choose 1 for Live Install or 2 for Done.
Accept the default 2-Done by pressing Enter.
Note 1: CD2 will eject from the CD-ROM drive when
installed.
Note 2: The system will reboot and come up requesting that
you insert MCS Base Platform System Software CD3.
ATTENTION
If you are not prompted for CD2, contact support.
ATTENTION
If you are not prompted for CD3, contact support.