Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 149)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Installing the iPlanet Monitor
Prerequisites
Make sure the System Management Console has been successfully
installed and started.
Procedures
Procedure 41 Adding the iPlanet Monitor
At the System Management Console,
1 Select Sites->MgmtSite->Servers->AppSvr
2 Click on the plus sign next to the server to which you are adding
the component.
3 Right click on the Components folder.
4 Select Add -> Component.
5 A list of component loads appears in the Load List window.
Select the latest Small load.
6 Click Apply. Wait for the new component and the component
configuration window to appear.
7 Enter a label (maximum six [6] characters) in the Service
Component Name field at the bottom of the configuration
window. The Service Component Name must be unique among
all components.
Example: iPIMon