Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 105)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Adding and configuring the Accounting
Module
Prerequisites
Make sure that
• The System Management Console has been successfully installed
and started.
• A valid license key has been entered and accepted by the
management system.
Note: Retain the default configuration settings for the
GwReliability Service and Gateway Register Service tabs. The
Colorful Ringback Service is not supported on MCS 5100.
Procedures
Procedure 28 Adding an Accounting Module component to the
server
At the System Management Console,
1 Select
Sites->MgmtSite->Servers->Add->General->MgmtSvr.
See Adding a server on page 103 for information on how to add
a server before adding the AcctMgr.
2 Click on the plus sign next to the server to which you are adding
the component.
3 Right click on the Components folder.
4 Select Add -> Component.
5 A list of component loads appears in the Load List window.
Select the latest Small load.
6 Click Apply. Wait for the new component and the component
configuration window to appear.
7 Enter a label (maximum six [6] characters) in the Service
Component Name field at the bottom of the configuration