Nortel Networks Sun Fire V210 (RoHS) - Manual (Page 129)

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Configuring the Provisioning Module
Prerequisites
Make sure the System Management Console has been installed and
started.
Procedures
Procedure 35 Adding the Provisioning Module (Small
SharedMicro)
At the System Management Console,
1 Select Sites->MgmtSite->Servers->AppSvr.
2 Click on the plus sign next to the server to which you are adding
the component.
3 Right click on the Components folder.
4 Select Add->Component.
5 A list of component loads appears in the Load List window.
Select the latest load for the “Provisioning Module (Small
SharedMicro)”.
6 Click Apply. Wait for the new component and the component
configuration window to appear.
7 Enter a label (maximum six [6] characters) in the Service
Component Name field in the dialog box that appears.
Example: Prov
Note: The Provisioning Module will appear under the
IPCMProvWCM components folder.
ATTENTION
Do not click Apply until you have finished configuring the
component.