Nortel Networks Sun Fire V210 (RoHS) User Manual
Page 150
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006
150
Copyright © Nortel Networks Limited 2006
Procedure 42 Configuring the iPlanet Monitor
At the System Management Console,
1
Use the values from the table that follows to complete the Web
Monitor tab parameters.
Note: The shaded rows indicate values that must be
addressed by the installer.
ATTENTION
Do not click Apply until you have finished configuring the tab.
Table 40 Web Monitor tab (Sheet 1 of 12)
Parameter
Recommended value
Notes
Example
SNMP request port
8161
default
SNMP agent IP address
<machine logical IP of
Provisioning Module>
120.120.13.25
Active
checked
default
Component Monitoring:
Class name
com.nortelnetworks.i
ms.mw.probe.iplanet.I
planetProcessHandler
default
Component Monitoring:
Component name
Process Stats
default
Component Monitoring:
Polling interval in minutes
1
default
Component Monitoring:
Active for polling
checked
default
Component Monitoring:
Threshold monitors:
Gauge name
percentConnectionQu
eueUsage
default
Component Monitoring:
Threshold monitors:
Upper limit
100
default