NCR S10XL - Manual (Page 101)

Using the System Utilities
Using the EISA Configuration Utility
NCR S10XL Hot Plug Server User Guide 5-15
MB (24 MB - 16 MB = 8 MB), and enter 8M in the
size field.
9. After entering the appropriate selection in the size
field, press [Enter]. You are returned to the system
baseboard configuration screen.
10. If your system is configured with more than 64 MB
of system memory, press [Control] + [R] to select 64
- 128 MB Extended Memory - - - - - - - CTRL-R to
add the Memory.
11. Observe the following memory configuration
screen:
Memory Address (-) 64 M Type: SYSTEM
Size 0
(value between 0 - 64M,
in increments of 4M)
12. Tab down to the size field.
If your system has 128 MB of system memory, enter
64M.
If your system has less than 128 MB of system
memory, subtract 64 MB from the amount of total
system memory and enter that value in this field.
For example, if your system has 96 MB of total
system memory, subtract 64 MB from 96 MB to get
32 MB (96 MB - 64 MB = 32 MB), and enter 32M in
the size field.