NCR S10XL - Manual (Page 127)

Sample Configurations
Sample Standard Configuration
NCR S10XL Hot Plug Server User Guide C-7
•
Set PCI slot 1 (PCI Ethernet Adapter
SMC8432BTA) to IRQ5.
•
Set PCI slot 2 (PCI Token Ring Adapter Olicom
OC-3136) to IRQ 14.
•
Set PCI slot 3 to --.
•
Set the On Board SCSI to IRQ 11.
•
Set the VGA Palette Snoop to Disabled.
•
Set the On Board SCSI AIC-7870 to Enabled.
•
Set the Boot Drive to Enabled.
When you finish, the screen should look like the
following:
PCI IRQ Setting [Manual]
INTA INTB INTC INTD
PCI Slot 1 [ 5] [ 14] [--] [11]
PCI Slot 2 [ 14] [--] [11] [ 5]
PCI Slot 3 [--] [11] [ 5] [14]
On Board SCSI [11] [ 5] [ 14] [--]
VGA Palette Snoop [Disabled]
On Board SCSI AIC-7870 [Enabled]
Boot Device [Enabled]
4. Press [Esc] to return to the main menu in BIOS
Setup.
5. Press [Esc], again. Select Yes to save System Settings
and PCI Adapter settings, and to reboot the system.