NCR S10XL - Manual (Page 148)

Hot Plug Backplane
SCSI Channel Configurations
D-6 NCR S10XL Hot Plug Server User Guide
Table D-1 lists the terminator settings for the single-
channel configuration.
Terminator Setting
With External Device
RA1, RA2, RA3
RA4, RA5, RA6 Removed
Removed (see note)
Without External Device
RA1, RA2, RA3
RA4, RA5, RA6 Installed
Removed
For configurations with external device,
terminate the signal at the external device. Also, be sure
the terminator switches are set to the left (combine)
position when installing a single-channel configuration.
See Figure D-1.
Table D-1
Terminator Settings for Single-
Channel Configuration
Note: