NCR S10XL - Manual (Page 73)

Using the BIOS Setup Utility
System Security Setup
NCR S10XL Hot Plug Server User Guide 4-21
effect only if the diskette and fixed disk controllers are
not
disabled through jumper settings.
There are three onboard communications ports:
•
Serial Port 1
•
Serial Port 2
•
Parallel Port
Serial Port 1
This parameter enables serial port 1 as COM 1 and sets
its address. Table 4-2 lists the Serial Port 1 settings.
Setting Function
Serial 1 (3F8h) COM1 with address 3F8h
Serial 2 (2F8h) COM2 with address 2F8h
Serial 3 (3E8h) COM3 with address 3E8h
Serial 4 (2E8h) COM4 with address 2E8h
Disabled Disables serial port 1
Onboard
Communication Ports
Table 4-2
Serial Port 1 Settings