NCR S10XL User Manual

Page 154

Advertising
background image

Hot Plug Backplane
Installation

D-12

NCR S10XL Hot Plug Server User Guide

9.

Install the drive tray into the backplane board.

Make sure that the power switch on the

drive tray is set to the Unlock/Power Off position
before you plug it to the board.

10.

Power on the system.

11.

Slide the power switch of the drive tray to the
Lock/Power On position. The power LED lights up.

Note:

Figure D-8
Installing the Hot Plug Drive Tray

Advertising