NCR S10XL - Manual (Page 61)

Using the BIOS Setup Utility
Basic System Configuration
NCR S10XL Hot Plug Server User Guide 4-9
To use the User option, follow these steps:
1. Highlight the User option.
2. Type in the number of cylinders, heads, and sectors
of the IDE fixed disk.
3. Choose YES when asked if you want to save CMOS
data.
The system automatically detects the total amount of
onboard memory and sets the corresponding value in
the Setup program. This information is not adjustable
by the user and is for display only. When you install
additional memory, the system automatically updates
the Total Memory parameter to show the new memory
size.
The CPU includes a math coprocessor so this parameter
shows Installed by default.
The video display is the monitor on which the operating
system prompt displays when you boot the system. The
system automatically detects the video mode of your
primary display and sets the configuration value
accordingly. The values are as follows:
•
Monochrome
•
CGA 40 columns x 25 rows
•
CGA 80 columns x 25 rows
•
VGA/EGA
System Memory
Math Coprocessor
Video Display