NCR S10XL - Manual (Page 71)

Using the BIOS Setup Utility
System Security Setup
NCR S10XL Hot Plug Server User Guide 4-19
System Security Setup
The Setup program has a number of security features to
prevent unauthorized access to the system and its data.
Enter the Setup program and select System Security.
The screen in Figure 4-6 displays.
System Security
Onboard Communication Ports
Serial Port 1 Base Address
Serial Port 2 Base Address
Parallel Port Base Address
Operation Mode
EPP Version Selection
Setup Password
Power-on Password
Disk Drive Control
Diskette Drive
Hard Disk Drive
System Boot Drive [Normal]
[Normal]
[Drive A then C]
[3F8]
[2F8]
[Parallel 1 (3BCh)]
[Standard Parallel Port (SPP)] Mode
[1.7]
[None]
[None]
= Move Highlight Bar,
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
= Change setting,
Page 1/1
Press the up- or down-arrow key to highlight from one
parameter to the next. Press the right- or left-arrow key
to change the setting.
The disk drive control features allow you to enable or
disable the read/write functions of a disk drive. These
features can also control the diskette drive or fixed disk
drive boot function to prevent loading operating
systems or other programs from a certain drive while
the other drives remain operational.
Figure 4-6
System Security Menu (Page 1 of
1)
Disk Drive Control