NCR S10XL - Manual (Page 201)

System Support Log
Preventive Maintenance
NCR S10XL Hot Plug Server User Guide E-43
Terminals and PCs
Clean terminals and PCs and replace batteries on a
regular basis. If battery replacement is necessary, follow
the procedures in the documentation that came with
your terminal or PC.
Use this list as a guide only. Refer to the documentation
that came with individual devices for specific
procedures.
•
Review and investigate any problems logged in the
Hardware Log since the past preventive
maintenance.
•
Review the System Software Log files.
•
Inspect the equipment. Check all lamps, indicators,
switches, controls, fans, blowers, and air filters.
Replace worn parts if necessary.
•
Observe the operation of the equipment.
•
Run the self-test diagnostic.
•
Clean device exterior surfaces.
•
Check only those adjustments known to require
periodic attention.
•
Provide users with feedback about overall system
performance.
•
Record the preventive maintenance information on
the appropriate Hardware Log.
General Customer
Preventive
Maintenance
Procedures