Sample standard configuration, Installing the hardware – NCR S10XL User Manual

Page 122

Advertising
background image

Sample Configurations
Sample Standard Configuration

C-2

NCR S10XL Hot Plug Server User Guide

Sample Standard
Configuration

A standard configuration might consist of the following:

Pentium 166 MHz processor with parity memory
support

32 MB system memory

ISA video board with 1 MB video RAM

PCI Ethernet adapter (SMC8432BTA)

PCI Token Ring adapter (Olicom OC-3136)

2 GB SCSI Fast and Wide disk drive connected to an
integrated Adaptec 7870 PCI SCSI controller

SCSI CD-ROM drive connected to an integrated
Adaptec 7870 PCI SCSI controller

Following are the steps to install and configure this
sample configuration.

To install the hardware, follow these steps:

1.

Strap the SCSI IDs for the 2 GB SCSI disk drive and
the SCSI CD-ROM drive. (See the documentation
that came with your drives for strapping
information.)

2

.

Install the 2 GB SCSI disk drive in a hot plug carrier
and install in the top hot plug bay.

Installing the
Hardware

Advertising