NCR S10XL User Manual

Page 134

Advertising
background image

Sample Configurations
Sample RAID Configuration

C-14

NCR S10XL Hot Plug Server User Guide

4.

Select Basic System Configuration. To go from page
to page, press [Page Down] or [Page Up].

5.

Go to Page 2 and set parameters as follows, in the
order indicated:

Hard Disk Block Mode

[Disabled]

Advanced PIO Mode

[Disabled]

Hard Disk Size > 504
MB

[Disabled]

Hard Disk 32-Bit Access

[Disabled]

Auto Configuration
Mode

[Disabled]

Fast Boot Mode

[Disabled]

Num Lock After Boot

[Enabled]

Memory Test

[Enabled]

6.

Return to Page 1, and set parameters as follows:

Diskette Drive A

[1.44 MB 3.5-inch]

Diskette Drive B

[None]

Fixed Disk 0 ( 0 MB)

[None]

Fixed Disk 1 ( 0 MB)

[None]

7.

Press [Esc] to return to the main menu in BIOS
Setup.

8.

Select Advanced System Configuration.

Page 1 - Verify that the parameters are set as follows:

C0000h - C7FFFh (Video BIOS)

[Enabled]

C8000h - CFFFFh

[Disabled]

D0000h - D7FFFh

[Disabled]

D8000h - DFFFFh

[Disabled]

Internal Cache (CPU Cache)

[Enabled]

Advertising