Nortel Networks BCM1000 - Manual (Page 103)

Chapter 2 Telephony hardware 103
Installation and Maintenance Guide
Telephones and adapters
The following telephones and devices can be used with the Business Communications Manager
system.
Business Series
Terminal T7100
— one-line display,
one memory button
without indicator.
T7000 (not shown)
(International only)
— four memory
buttons, without
display or
indicators.
Business Series
Terminal T7208 —
one-line display, eight
memory buttons with
indicators
Business Series
Terminal T7316
— two-line
display, three
display buttons,
16 memory
buttons with
indicators, eight
memory buttons
without indicators. i2004 IP
telephone —
connects through
an internet link to
the Business
Communications
Manager.
Multi-line display,
six memory keys
with indicators. It
can be used to call
through VoIP or PBX lines.
Not shown: i2002 IP telephone and i2050 Software
Phone interface.
Norstar M7324
— two-line
display with
three display
buttons, 24
memory buttons
with indicators.
Options: two
CAP modules.
Norstar
M7324N
(UK and Australia only) — same features.
Note: There is no Business Series Terminal
equivalent to this telephone.
•Central answering
position (CAP) (North
American systems
only) — connects to an
M7324 telephone and
provides 48 additional
memory buttons. You
need one Station
Auxiliary Power Supply (SAPS) for every M7324
telephone that has CAP modules.
• Central answering position (CAPN) (UK and
Australia only) — same features, connects to
M7324N telephones