Nortel Networks BCM1000 - Manual (Page 241)

Chapter 16 Preparing hardware for maintenance or upgrades 241
Installation and Maintenance Guide
The Business Communications Manager automatically starts booting.
7 Replace all the connectors to the front of the units.
The reboot can take up to 10 minutes.
Software restart
If you did not shut the system power down, restart the software
1 Refer to “Shutting down the system software” until you get to step 7.
2 At this point, select Reboot on the Logoff menu.
The system reboots.
Warning: When you restart the system, all IP clients/voice mail and VoIP ports are not
available until the system services restart.
If you have a mirrored disk system, once the services have been restarted, the system
automatically ensures that the mirrored disk is updated.
Warning: When you restart the system, all IP clients/voice mail and VoIP ports are not
available until the system services restart.
If you have a mirrored disk system, once the services have been restarted, the system will
automatically ensure the mirrored disk is updated.