Figure 48, Bcm1000 ds258 connector – Nortel Networks BCM1000 User Manual
Page 133
Advertising
Chapter 6 Installing the BCM1000e (expansion unit)
133
Installation and Maintenance Guide
2
Plug the other end of the cable into the DS256 connector on the faceplate of the MSC in the
BCM1000. Refer to
Figure 48
BCM1000 DS258 connector
Warning:
The timing in the Business Communications Manager system is designed for a
5 m (16 ft.) Category 5 patch cable. The system cannot work properly if you connect the
BCM1000e using a cable that is any other length.
DS256 connector
Advertising