Nortel Networks BCM1000 - Manual (Page 78)

78 Chapter 1 Introducing the Business Communications Manager
P0607659 02
Connection ports
You can connect to the BCM1000 through your computer via the serial port or a LAN card
connection to perform setup and maintenance procedures. Refer to
Figure 20 . This guide leads you
through the process of making either of these connections. Refer to “Using a null modem serial
cable” on page 169 and “Connecting the Ethernet crossover cable” on page 173 .
Programming procedures using the Unified Manager, are explained in the Programming
Operations Guide.
Figure 20 BCM1000 external points of connection
LAN Serial port
Note: On some new systems, the serial and video ports are
swapped. The serial cable connector will only fit on the correct port.