Nortel Networks BCM1000 User Manual
Page 245
Advertising
Chapter 17 Replacing the hard disk
245
Installation and Maintenance Guide
4
Remove the four screws holding the hard disk bracket to the BCM1000. Refer to
and
.
Figure 103
Hard disk wiring (single disk) and screw locations (2.0 hardware)
Figure 104
Hard disk and screw locations (2.5 version hardware)
Note:
If you are upgrading to a mirrored disk system, remove the power cables from the
media bay module housing, as well.
Power supply
Arrows show bracket
screw locations
Power supply
Arrows show bracket
screw locations
Advertising