Bcm1000 leds, Figure 21, Bcm1000 operational leds – Nortel Networks BCM1000 User Manual
Page 79
Chapter 1 Introducing the Business Communications Manager
79
Installation and Maintenance Guide
BCM1000 LEDs
A line of 10 operational LEDs display on the face of the BCM1000. Refer to
. These
LEDs show the current state of various hardware components.
Figure 21
BCM1000 operational LEDs
These LEDs monitor:
•
power (
)
•
disk drive (
)
•
system status (
)
•
five PCI power indicators
•
temperature (
)
•
fans (
)
The LED states are described in
.
The Unified Manager contains a monitoring tool, that allows you to determine the current
condition of the LEDs from your computer. Refer to
“Using the System Status Monitor to monitor
Note:
These LEDs correspond to the cards, not to the PCI slots.
For example, a WAN card uses only one PCI slot, but has the capacity for two
connections. In this case, both LEDs stay lit as long as a WAN card is present.
Operational LEDs
Fan
Temperatur
PCI Devices
Status
Disk
Power
Temperature
1
PCI devices