Nortel Networks BCM1000 User Manual
Page 22
![background image](/manuals/191815/22/background.png)
22 BCM1000, BCM 3.5 addendum
BCM1000 Installation and Maintenance Guide
P0607659 02
The T7316E can be used alone or you can expand feature and line button capacity by adding one or more
Key Indicator Modules (KIMs). Each KIM has 24 buttons with indicator displays. A combination of
T7316E+KIMs is still referred to as a Central Answering Position (CAP).
A KIM connected to a T7316E that is configured under CAP/KIM assignment as an enhanced CAP
(eCAP) supports line appearances, multiple appearances of a target line and/or hunt group appearances.
In this configuration, the KIM is referred to as an eKIM. A T7316E supports a maximum of four eKIMs.
The Business Communications Manager can support a maximum of 12 eCAPs.
A T7316E+KIM that is not configured in system programming does not support line appearances, target
line appearances, or hunt group appearances. For this configuration, the KIM is referred to as an OKIM.
A T7316E can support a maximum of nine OKIMs. You need to add a system auxiliary power supply
(SAPS) if you install five or more OKIMs on a T7316E. The system can support as many
T7316E+OKIM combinations as required.
You can configure the KIM buttons for features and autodial numbers under User Preferences,
CAP/KIM button programming. The user can also configure memory button features at the telephone.
The user can move lines from the T7316E to an eKIM, or from eKIM to eKIM, but initial line assignment
and hunt group appearance assignment occurs in system programming.
The T7316E telephone displays a set of icons in place of flashing arrows when it is connected to a
system with BCM 3.5 software. If you connect a T7316E telephone to a system that is running previous
versions, the standard line indicators display. The KIM also displays these icons. KIMs are only
supported by BCM 3.5 and later software.
Refer to the Business Communications Manager 3.5 Programming Operations Guide for details about
programming the T7316E and CAPs.
Table 3 T7316E and KIM display icons
Active call
The line is active and/or you are connected to this telephone.
Ringing
A call is coming into this line.
Hold
The call on this line is on Hold at this telephone.
Call forward
The call on this line has been forwarded.
Active button
The feature assigned to this button is active. Also used by Do Not Disturb.
T7316E with KIM
,