National Instruments AT E Series - Manual (Page 10)

© National Instruments Corporation xi AT E Series User Manual
About This Manual
This manual describes the electrical and mechanical aspects of each device
in the AT E Series product line and contains information concerning their
operation and programming. Unless otherwise noted, text applies to all
devices in the AT E Series.
The AT E Series includes the following devices:
• AT-MIO-16E-1
• AT-MIO-16E-2
• AT-MIO-64E-3
• AT-MIO-16E-10
• AT-MIO-16DE-10
• AT-MIO-16XE-10
• AT-AI-16XE-10
• AT-MIO-16XE-50
The AT E Series devices are high-performance multifunction analog,
digital, and timing I/O devices for the PC AT series computers. Supported
functions include analog input (AI), analog output (AO), digital I/O (DIO),
and timing I/O (TIO).
Conventions
The following conventions appear in this manual:
<> Angle brackets that contain numbers separated by an ellipsis represent
a range of values associated with a bit or signal name—for example,
DIO<3..0>.
♦
The
♦ symbol indicates that the following text applies only to a specific
product, a specific operating system, or a specific software version.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash. When this symbol is marked on
the device, see the Safety Information section of Chapter 1, Introduction,
for precautions to take.