National Instruments AT E Series - Manual (Page 181)

Index
© National Instruments Corporation I-11 AT E Series User Manual
differential connections
DIFF input configuration, 4-20
floating signal sources, 4-22
ground-referenced signal
sources, 4-21
nonreferenced signal
sources, 4-22
single-ended connections, 4-24
floating signal sources (RSE
configuration), 4-25
grounded signal sources (NRSE
configuration), 4-25
power connections, 4-29
timing connections, 4-30
data acquisition timing connections
AIGATE signal, 4-39
CONVERT* signal, 4-38
EXTSTROBE* signal, 4-41
SCANCLK signal, 4-40
SISOURCE signal, 4-39
STARTSCAN signal, 4-36
TRIG1 signal, 4-33
TRIG2 signal, 4-34
general-purpose timing signal
connections
FREQ_OUT signal, 4-50
GPCTR0_GATE signal, 4-45
GPCTR0_OUT signal, 4-46
GPCTR0_SOURCE signal, 4-44
GPCTR0_UP_DOWN
signal, 4-46
GPCTR1_GATE signal, 4-47
GPCTR1_OUT signal, 4-48
GPCTR1_SOURCE signal, 4-47
GPCTR1_UP_DOWN
signal, 4-48
programmable function input
connections, 4-31
waveform generation timing
connections, 4-41
UISOURCE signal, 4-44
UPDATE* signal, 4-42
WFTRIG signal, 4-41
types of signal sources, 4-17
floating, 4-17
ground-referenced, 4-17
single-ended connections
description, 4-24
floating signal sources (RSE), 4-25
grounded signal sources (NRSE), 4-25
when to use, 4-24
SISOURCE signal, 4-39
software
programming choices
register-level programming, 1-4
software drivers, D-1
specifications
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3
analog input, A-1
amplifier characteristics, A-3
dynamic characteristics, A-4
input characteristics, A-1
stability, A-5
transfer characteristics, A-3
analog output, A-5
dynamic characteristics, A-7
output characteristics, A-5
stability, A-7
transfer characteristics, A-6
voltage output, A-7
bus interface, A-10
digital I/O, A-8
physical, A-10
power requirements, A-10
timing I/O, A-8
triggers
analog trigger, A-9
digital trigger, A-9
RTSI, A-10