National Instruments AT E Series - Manual (Page 120)

Appendix A Specifications for AT-MIO-16E-10 and AT-MIO-16DE-10
© National Instruments Corporation A-15 AT E Series User Manual
Max update rate...................................... 100 kS/s, system dependent
Type of DAC.......................................... Double buffered, multiplying
FIFO buffer size ..................................... None
Data transfers ......................................... DMA, interrupts,
programmed I/O
DMA modes ........................................... Single transfer, demand transfer
Transfer Characteristics
Relative accuracy (INL)
After calibration .............................. ±0.3 LSB typ, ±0.5 LSB max
Before calibration ........................... ±4 LSB max
DNL
After calibration .............................. ±0.3 LSB typ, ±1.0 LSB max
Before calibration ........................... ±3 LSB max
Monotonicity .......................................... 12 bits, guaranteed after
calibration
Offset error
After calibration .............................. ±1.0 mV max
Before calibration ........................... ±200 mV max
Gain error (relative to internal reference)
After calibration .............................. ±0.01% of output max
Before calibration ........................... ±0.5% of output max
Gain error
(relative to external reference) ............... 0 to +0.67% of output max,
not adjustable
Voltage Output
Ranges .................................................... ±10 V, 0 to 10 V, ±EXTREF,
0 to EXTREF
(software selectable)
Output coupling...................................... DC